Peanut Peeling Machine Roasted Groundnut Skin Remover For Sale

The peanut peeling machine is specially designed for peeling off roasted peanuts. This machine adopts the principle of differential rolling friction transmission. It can automatically remove the red outer skin without causing any damage to the peanut kernels.

Our factory processes different models of roasted peanut red skin peeler machines for choice, with output ranging from 200-1000kg/h. The peanut’s peeling rate is as high as 98%, and the kernel damage rate is less than 2%.

This groundnut peeling machine is widely used in the production of fried peanuts, multi-flavored peanuts, peanut milk, peanut protein powder, peanut candy, peanut brittle, peanut cake, peanut butter, and canned products.

working video of a roasted peanut peeling machine

Requirements for raw materials

1. The moisture content of the raw materials after being fried/roasted is about 4%.
2. After the raw materials are out of the oven, the temperature is too high, which will affect the peeling effect and damage the machine.
3. The raw materials that need to be peeled should not contain impurities such as iron filings and stones to prevent damage to the machine.

Peanuts are usually used with a peanut roasting machine before they are peeled, which we can also provide. For more information please click Electric & Gase Peanut Roasting Machine Groundnut Roaster For Sale .

Wiring and operation method

1. Voltage: 380V, 3phase, 50hz.
2. After wiring from the hopper at the rear of the machine, there is a switch. Turn on the switch for wiring.
3. Place the machine stably keep it level, and put a leather bag on the fan mouth.
4. Before starting the machine, check whether the power line is normal, whether the components are loose, and whether the test operation is normal.
5. Make sure that the main unit and the fan are rotating forward.

peanut peeling machine for salehigh-efficiency peanut peeler

Main structure and function

This unit consists of a peanut peeling machine and skin storage equipment:

1. The peeling machine is used to remove the red skin of peanuts of various specifications.
2. The skin storage equipment is used to absorb the peeled peanut skins into the skin bag through the fan.

Main function:

Adopting the roller rubbing structure, the dried peanut kernel enters into the main machine through the hopper. The red coat skin is removed by the high-speed rotating rubbing roller and sucked out by the fan, and the peanut white kernel after peeling is discharged through the front material port.

Operation of peanut peeling machine

Before starting the machine, check whether the power circuit is normal or not and whether the test operation is normal.

Start the peanut peeling machine first, then put the cooled cooked peanuts.

Rotate the peeler machine’s discharge plate rod to the right to raise the discharge plate and slow the rapid outflow of peanuts.

Re-adjust the discharge plate to the lowest height with a low half-grain rate and high peeling rate.

groundnut dry peeling machineautomatic groundnut peeler

Groundnut skin remover advantages

• The stripping rate is as high as 98% and the crushing rate is low.
• The machine is small in size and easy to install and operate.
• Peanut kernel and red skin are separated automatically, easy to collect.
• The red skin is collected by a wind machine, convenient for other uses such as pharmaceuticals.

commercial nut processing machinepeanut skin removal machine

Peanut skin removing machine parameters

ModelCapacityParametersht-1200-250kg/hMotor power: 0.55kw
Fan power: 0.37kw
Voltage: 380V/220V
Frequency: 50HZ
Weight: 110kg
Peeling rate: ≥98%
Size: 1200*500*1200mmht-2400-500kg/hMotor power: 0.55kw*2
Fan power: 0.55kw
Voltage: 380V/220V
Frequency: 50HZ
Weight: 200kg
Peeling rate: ≥98%
Size: 1200*750*1200mmht-3600-750kg/hMotor power: 0.55kw*3
Fan power: 0.75kw
Voltage: 380V/220V
Frequency: 50HZ
Weight: 280kg
Peeling rate: ≥98%
Size: 1200*1050*1200mmht-4800-1000kg/hMotor power: 0.55kw*4
Fan power: 1.5kw
Voltage: 380V/220V
Frequency: 50HZ
Weight: 360kg
Peeling rate: ≥98%
Size: 1200*1400*1200mmpeanut peeling machine technical data

Machine maintenance and repair

• After the work is done, the residue of the sand roller should be removed with a brush and the broken leather debris of the storage bag (box) should be cleaned.
• Regularly clean the sanding roller.
• Clean the peanuts and granules in the fan bucket every day, and open the sliding door at the lower end of the machine to release the particles.
• If the single sand does not turn, please replace the belt.
• Regularly clean the fan impeller (a peanut powder and smashed skin on the impeller).

You can buy a factory-price peanut peeling machine from Taizy Machinery Manufacturing supplier with free instruction. We have sent machines at low cost to Spain, Vietnam, Cameroon, Kenya, Iran, Congo, Tanzania, Bolivia, Sri Lanka, Nigeria, and Egypt. You can send us your specific needs through the message form on the right, and hopefully, we can provide you with the right equipment for your peanut processing project.